The Apache Tomcat Connector - Webserver HowTo

Apache HowTo

This document explains how to connect Tomcat to the popular open source web server, Apache. There is actually three versions of Apache, 1.3, 2.0 and 2.2 and all can be used with mod_jk, the Tomcat redirector module.

It is recommended that you also read the Workers HowTo document to learn how to setup the working entities between your web server and Tomcat Engines. For more detailed configuration information consult the Reference Guide for workers.properties, uriworkermap and Apache.

This document was originally part of Tomcat: A Minimalistic User's Guide written by Gal Shachor, but has been split off for organizational reasons.

Document Conventions and Assumptions

${tomcat_home} is the root directory of tomcat. Your Tomcat installation should have the following subdirectories: ${tomcat_home}\conf - Where you can place various configuration files ${tomcat_home}\webapps - Containing example applications ${tomcat_home}\bin - Where you place web server plugins In all the examples in this document ${tomcat_home} will be /var/tomcat3. A worker is defined to be a tomcat process that accepts work from the Apache server.

Supported Configuration

The mod_jk module was developed and tested on: Linux, FreeBSD, AIX, HP-UX, MacOS X, Solaris and should works on major Unixes platforms supporting Apache 1.3 and/or 2.0/2.2 WinNT4.0-i386 SP4/SP5/SP6a (should be able to work with other service packs), Win2K and WinXP and Win98 Cygwin (until you have an apache server and autoconf/automake support tools) Netware iSeries V5R1 and V5R2 with Apache 2.0.39. Be sure to have the latest Apache PTF installed. Tomcat 3.2.x, Tomcat 3.3.x, Tomcat 4.0.x, Tomcat 4.1.x, Tomcat 5.0.x, Tomcat 5.5.x and Tomcat 6. The redirector uses ajp12 and ajp13 to send requests to the Tomcat containers. There is also an option to use Tomcat in process, more about the in-process mode can be found in the in process howto.

Who support ajp protocols ?

The ajp12 protocol is only available in Tomcat 3.2.x and 3.3.x. The ajp12 has been deprecated with Tomcat 3.3.x and you should use instead ajp13 which is the only ajp protocol known by Tomcat 4.x, 5 and 5.5 and Tomcat 6. Of course Tomcat 3.2.x and 3.3.x also support ajp13 protocol. Others servlet engines such as jetty have support for ajp13 protocol

How does it work ?

In a nutshell a web server is waiting for client HTTP requests. When these requests arrive the server does whatever is needed to serve the requests by providing the necessary content. Adding a servlet container may somewhat change this behavior. Now the web server needs also to perform the following: Load the servlet container adapter library and initialize it (prior to serving requests). When a request arrives, it needs to check and see if a certain request belongs to a servlet, if so it needs to let the adapter take the request and handle it. The adapter on the other hand needs to know what requests it is going to serve, usually based on some pattern in the request URL, and to where to direct these requests. Things are even more complex when the user wants to set a configuration that uses virtual hosts, or when they want multiple developers to work on the same web server but on different servlet container JVMs. We will cover these two cases in the advanced sections.

mod_jk can be obtained in two formats - binary and source. Depending on the platform you are running your web server on, a binary version of mod_jk may be available.

It is recommended to use the binary version if one is available. If the binary is not available, follow the instructions for building mod_jk from source. The mod_jk source can be downloaded from a mirror here

The binaries for mod_jk are now available for several platforms. The binaries are located in subdirectories by platform.

For some platforms, such as Windows, this is the typical way of obtaining mod_jk since most Windows systems do not have C compilers.

For others, the binary distribution of mod_jk offers simpler installation.

For example JK 1.2.x can be downloaded from a mirror here (look for JK 1.2 Binary Releases). The "JK 1.2 Binary Releases" link contains binary version for a variety of operating systems for both Apache 1.3 and Apache 2.

mod_jk requires two entities:

• mod_jk.xxx - The Apache module, depending on your operating system, it will be mod_jk.so, mod_jk.nlm or or QZTCJK.SRVPGM (see the build section).
• workers.properties - A file that describes the host(s) and port(s) used by the workers (Tomcat processes). A sample workers.properties can be found under the conf directory.

Also as with other Apache modules, mod_jk should be first installed on the modules directory of your Apache webserver, ie : /usr/lib/apache and you should update your httpd.conf file.

Disabling old mod_jserv

If you've previously configured Apache to use mod_jserv, remove any ApJServMount directives from your httpd.conf. If you're including tomcat-apache.conf or tomcat.conf, you'll want to remove them as well - they are specific to mod_jserv. The mod_jserv configuration directives are not compatible with mod_jk !

Using Tomcat auto-configure

The auto-configure works only for a single Tomcat running on the same machine where Apache (httpd) is running. The simplest way to configure Apache to use mod_jk is to turn on the Apache auto-configure setting in Tomcat and put the following include directive at the end of your Apache httpd.conf file (make sure you replace $TOMCAT_HOME with the correct path for your Tomcat installation: #To be added at the end of your httpd.conf Include $TOMCAT_HOME/conf/jk/mod_jk.conf-auto Note: this file may also be generated as $TOMCAT_HOME/conf/auto/mod_jk.conf This will tell Apache to use directives in the mod_jk.conf-auto file in the Apache configuration. This file is created by enabling the Apache auto-configuration by creating your workers.properties file at $TOMCAT_HOME/conf/jk/workers.properties and adding the listener to the Engine element in the server.xml file as per the following example. Please note that this example is specific to Tomcat 5.x, unlike other sections of this document which also apply to previous Tomcat branches. ... <Engine ...> ... <Listener className="org.apache.jk.config.ApacheConfig" modJk="/path/to/mod_jk.so" /> ... </Engine> ... Then restart Tomcat and mod_jk.conf should be generated. For more information on this topic, please refer to the API documentation at the Tomcat docs website.

Custom mod_jk configuration

You should use custom configuration when : You couldn't use mod_jk.conf-auto since Tomcat engine isn't on the same machine that your Apache web server, ie when you have an Apache in front of a Tomcat Farm. Another case for custom configuration is when your Apache is in front of many differents Tomcat engines, each one having it's own configuration, a general case in ISP hosting Also all Apache webmaster will retain custom configuration to be able to tune the settings to their real needs.

Simple configuration example

Here is a simple configuration: # Load mod_jk module LoadModule jk_module libexec/mod_jk.so # Declare the module for <IfModule directive> (remove this line on Apache 2.0.x) AddModule mod_jk.c # Where to find workers.properties JkWorkersFile /etc/httpd/conf/workers.properties # Where to put jk shared memory JkShmFile /var/log/httpd/mod_jk.shm # Where to put jk logs JkLogFile /var/log/httpd/mod_jk.log # Set the jk log level [debug/error/info] JkLogLevel info # Select the timestamp log format JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " # Send servlet for context /examples to worker named worker1 JkMount /examples/servlet/* worker1 # Send JSPs for context /examples to worker named worker1 JkMount /examples/*.jsp worker1

We'll discuss here the mod_jk directives and details behind them

Define workers

JkWorkersFile specify the location where mod_jk will find the workers definitions. JkWorkersFile /etc/httpd/conf/workers.properties

Logging

JkLogFile specify the location where mod_jk is going to place its log file. JkLogFile /var/log/httpd/mod_jk.log Since JK 1.2.3 for Apache 2.0/2.2 and JK 1.2.16 for Apache 1.3 this can also be used for piped logging: JkLogFile "|/usr/bin/rotatelogs /var/log/httpd/mod_jk.log 86400" JkLogLevel set the log level between : info log will contains standard mod_jk activity (default). error log will contains also error reports. debug log will contains all informations on mod_jk activity JkLogLevel info info should be your default selection for normal operations. JkLogStampFormat will configure the date/time format found on mod_jk logfile. Using the strftime() format string it's set by default to "[%a %b %d %H:%M:%S %Y]" JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkRequestLogFormat will configure the format of mod_jk individual request logging. Request logging is configured and enabled on a per virtual host basis. To enable request logging for a virtual host just add a JkRequestLogFormat config. The syntax of the format string is similiar to the Apache LogFormat command, here is a list of the available request log format options: Options Description %b Bytes sent, excluding HTTP headers (CLF format) %B Bytes sent, excluding HTTP headers %H The request protocol %m The request method %p The canonical Port of the server serving the request %q The query string (prepended with a ? if a query string exists, otherwise an empty string) %r First line of request %s Request HTTP status code %T Request duration, elapsed time to handle request in seconds '.' micro seconds %U The URL path requested, not including any query string. %v The canonical ServerName of the server serving the request %V The server name according to the UseCanonicalName setting %w Tomcat worker name %R Session route name (available with 1.2.19 and up) JkRequestLogFormat "%w %V %T"

Forwarding

The directive JkOptions allow you to set many forwarding options which will enable (+) or disable (-) following option. Without any leading signs, options will be enabled. The three following options +ForwardURIxxx are mutually exclusive. Exactly one of them is required, a negative sign prefix is not allowed with them. By default, the option ForwardURICompat is turned on. You can turn this off by switching on one of the other two. All options are inherited from the global server to virtual hosts. Options that support enabling (plus options) and disabling (minus options), are inherited in the following way: options(vhost) = plus_options(global) - minus_options(global) + plus_options(vhost) - minus_options(vhost) JkOptions ForwardURICompat, you told mod_jk to send the URI to Tomcat normally, which is less spec compliant but mod_rewrite compatible, use it for compatibility with Tomcat 3.2.x engines (on by default). JkOptions +ForwardURICompat JkOptions ForwardURICompatUnparsed, the forwarded URI is unparsed, it's spec compliant but broke mod_rewrite. JkOptions +ForwardURICompatUnparsed JkOptions ForwardURIEscaped, the forwarded URI is escaped and Tomcat (since 3.3 rc2) will do the decoding part. JkOptions +ForwardURIEscaped JkOptions ForwardDirectories is used in conjunction with DirectoryIndex directive of Apache web server. As such mod_dir should be available to Apache, statically or dynamically (DSO) When DirectoryIndex is configured, Apache will create sub-requests for each of the local-url's specified in the directive, to determine if there is a local file that matches (this is done by stat-ing the file). If ForwardDirectories is set to false (default) and Apache doesn't find any files that match, Apache will serve the content of the directory (if directive Options specifies Indexes for that directory) or a 403 Forbidden response (if directive Options doesn't specify Indexes for that directory). If ForwarDirectories is set to true and Apache doesn't find any files that match, the request will be forwarded to Tomcat for resolution. This is used in cases when Apache cannot see the index files on the file system for various reasons: Tomcat is running on a different machine, the JSP file has been precompiled etc. Note that locally visible files will take precedence over the ones visible only to Tomcat (i.e. if Apache can see the file, that's the one that's going to get served). This is important if there is more then one type of file that Tomcat normally serves - for instance Velocity pages and JSP pages. JkOptions +ForwardDirectories JkOptions ForwardLocalAddress, you ask mod_jk to send the local address, of the Apache web server instead remote client address. This can be used by Tomcat remote address valve for allowing connections only from registered Apache web servers. JkOptions +ForwardLocalAddress JkOptions FlushPackets, you ask mod_jk to flush Apache's connection buffer after each AJP packet chunk received from Tomcat. This option can have a strong performance penalty for Apache and Tomcat as writes are performed more often than would normally be required (ie: at the end of each response). JkOptions +FlushPackets JkOptions FlushHeader, you ask mod_jk to flush Apache's connection buffer after the response headers have been received from Tomcat. JkOptions +FlushHeader JkOptions DisableReuse, you ask mod_jk to close connections immediately after their use. Normally mod_jk uses persistent connections and pools idle connections to reuse them, when new requests have to be sent to Tomcat. Using this option will have a strong performance penalty for Apache and Tomcat. Use this only as a last resort in case of unfixable network problems. If a firewall between Apache and Tomcat silently kills idle connections, try to use the worker attribute socket_keepalive in combination with an appropriate TCP keepalive value in your OS. JkOptions +DisableReuse JkOptions ForwardKeySize, you ask mod_jk, when using ajp13, to forward also the SSL Key Size as required by Servlet API 2.3. This flag shouldn't be set when servlet engine is Tomcat 3.2.x (off by default). JkOptions +ForwardKeySize The directive JkEnvVar allows you to forward environment variables from Apache server to Tomcat engine. The variables can be retrieved on the Tomcat side as request attributes. You can add a default value as a second parameter to the directive. If the default value is not given explicitely, the variable will only be send, if it is set during runtime. The variables are inherited from the global server to virtual hosts. JkEnvVar SSL_CLIENT_V_START undefined

Assigning URLs to Tomcat

If you have created a custom or local version of mod_jk.conf-local as noted above, you can change settings such as the workers or URL prefix. JkMount directive assign specific URLs to Tomcat. In general the structure of a JkMount directive is: JkMount [URL prefix] [Worker name] # send all requests ending in .jsp to worker1 JkMount /*.jsp worker1 # send all requests ending /servlet to worker1 JkMount /*/servlet/ worker1 # send all requests jsp requests to files located in /otherworker will go worker2 JkMount /otherworker/*.jsp worker2 You can use the JkMount directive at the top level or inside <VirtualHost> sections of your httpd.conf file.

Configuring Apache to serve static web application files

If the Tomcat Host appBase (webapps) directory is accessible by the Apache web server, Apache can be configured to serve web application context directory static files instead of passing the request to Tomcat. Caution: If Apache is configured to serve static pages for a web application it bypasses any security contraints you may have configured in your web application web.xml config file. Use Apache's Alias directive to map a single web application context directory into Apache's document space for a VirtualHost: # Static files in the examples webapp are served by apache Alias /examples /vat/tomcat3/webapps/examples # The following line prohibits users from directly access WEB-INF <Location "/examples/WEB-INF/"> AllowOverride None deny from all </Location> # All JSP will goes to worker1 JkMount /*.jsp worker1 # All servlets goes to worker1 JkMount /*/servlet/ worker1 Starting with mod_jk 1.2.6 for Apache 2.0/2.2 and 1.2.19 for Apache 1.3, it's possible to exclude some URL/URI from jk processing by setting the env var no-jk, for example with the SetEnvIf Directive. You could use no-jk env var to fix problem with mod_alias or mod_userdir directive when jk and alias/userdir URLs matches. # All URL goes to tomcat except the one containing /home <VirtualHost *:80> ServerName testxxx.mysys DocumentRoot /www/testxxx/htdocs # Use SetEnvIf to st no-jk when /home/ is encountered SetEnvIf Request_URI "/home/*" no-jk # Now /home will goes to /home/dataxxx/ Alias /home /home/dataxxx/ <Directory "/home/dataxxx"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> JkMount /* myssys-xxx </VirtualHost> Use the mod_jk JkAutoAlias directive to map all web application context directories into Apache's document space. Attempts to access the WEB-INF or META-INF directories within a web application context or a Web Archive *.war within the Tomcat Host appBase (webapps) directory will fail with an HTTP 403, Access Forbidden # Static files in all Tomcat webapp context directories are served by apache JkAutoAlias /var/tomcat3/webapps JkMount /*.jsp ajp13 JkMount /*/servlet/ ajp13 If you encoded all your URLs to contain the session id (;jsessionid=...), and you later decide, you want to move part of the content to Apache httpd, you can tell mod_jk to strip off all session ids from URLs for those requests, that do not get forwarded via mod_jk. You enable this feature by setting JkStripSession to On. It can be enabled individually for virtual servers. The default value is Off.

The mod_jk build use the widely used configure system.

Prepare your mod_jk configure from subversion

In case you get source from subversion, ie without an existing configure script, you should have autoconf for configuration and installation. To create tomcat-connectors's autoconf script, you will need libtool 1.5.2 or higher, and autoconf 2.59 or newer. Those tools will not be required if you are just using a package downloaded from apache.org, they are only required for developers. To create the configure script just type : [user@host] ~ $ ./buildconf.sh

Using configure to build mod_jk

Here's how to use configure to prepare mod_jk for building, just type: ./configure [autoconf arguments] [tomcat-connectors arguments] You could set CFLAGS and LDFLAGS to add some platform specifics: [user@host] ~ $ LDFLAGS=-lc ./configure -with-apxs=/home2/local/apache/bin/apxs If you want to build mod_jk for Apache 1.3 and 2.0/2.2, you should use configure and indicate Apache 1.3 apxs location (--with-apxs) use make copy the mod_jk binary to the apache modules location make clean (to remove all previously compiled modules) use configure and indicate Apache 2.0/2.2 apxs location, then make.

configure arguments

Apache related parameters --with-apxs[=FILE] FILE is the location of the apxs tool. Default is finding apxs in PATH. It builds a shared Apache module. It detects automaticly the Apache version. (2.0/2.2 and 1.3) --with-apache=DIR DIR is the path where apache sources are located. The apache sources should have been configured before configuring mod_jk. DIR is something like: /home/apache/apache_1.3.19 It builds a static Apache module. --enable-EAPI This parameter is needed when using Apache-1.3 and mod_ssl, otherwise you will get the error message: "this module might crash under EAPI!" when loading mod_jk.so in httpd. Not needed when --with-apxs has been used --enable-prefork In case you build mod_jk for a multi-threaded Apache 2.0/2.2 MPM (Multi-Processing Module), some areas of mod_jk code need to be synchronized to make it thread-safe. Configure autodetects, whether your are using a multi-threaded MPM. For instance, the worker MPM is multi-threaded, the prefork MPM is not. Depending on how you build your Apache httpd, in some cases configure detects that it needs to build thread safe, although actually it would not be necessary. One such case is, if you build against Apache httpd with prefork MPM, and your APR (Apache Portable Runtime) libraries have been build with thread support ( the output of "apxs -q EXTRA_CPPFLAGS" will contain "-D_REENTRANT"). If you are sure, that your MPM is not multi-threaded, you can use "--enable-prefork" to force the removal of the synchronization code (thus increasing performance a bit). --enable-flock In case the Operating system supports flock system call use this flag to enable this faster locks that are implemented as system call instead emulated by GNU C library. However those locks does not work on NFS mounted volumes, so you can use "--enable-flock" during compile time to force the flocks() calls. JNI related parameters --enable-jni Build the JNI worker and so the build process will require some informations about your Java Environment --with-java-home=DIR DIR is the patch to the JDK root directory. Something like: /opt/java/jdk12 --with-os-type=SUBDIR SUBDIR is the os-type subdirectory, configure should guess it correctly. --with-arch-type=SUBDIR SUBDIR is the arch subdirectory, configure should guess it correctly. --with-java-platform=VAL VAL is the Java platform 1 is 1.1.x and 2 is for 1.2 anf higher, configure should guess it correctly.

Examples of configure use

Apache 1.3 and 2.0/2.2 build [user@host] ~ $ ./configure --with-apxs=/usr/sbin/apxs [user@host] ~ $ make [user@host] ~ $ cp ./apache-1.3/mod_jk.so /usr/lib/apache [user@host] ~ $ make clean [user@host] ~ $ ./configure --with-apxs=/usr/sbin/apxs2 [user@host] ~ $ make [user@host] ~ $ cp ./apache-2.0/mod_jk.so /usr/lib/apache2 Apache 2.0/2.2 build with JNI support [user@host] ~ $ ./configure --with-apxs2=/opt/apache2/bin/apxs \ --with-java-home=${JAVA_HOME} --with-java-platform=2 \ --enable-jni Apache 1.3 build without JNI support [user@host] ~ $ ./configure --with-apxs=/usr/sbin/apxs

The module was developed using Visual C++ version 6.0, so having this environment is a prerequisite if you want to perform a custom build.

The steps that you need to take are:

• Change directory to the apache 1.3 or apache 2.0 source directory depending on your version of Apache.
• If you want to build mod_jk for Apache 1.3, set an APACHE1_HOME environment variable which points to where your Apache 1.3 is installed. A mod_jk module for Apache 2.0 build will require APACHE2_HOME environment variable to be set.
• Copy mod_jk.so to Apache's modules directory.

An example on how to build mod_jk for Apache 1.3:

Set location for Apache 1.3 sources c:\>set APACHE1_HOME=c:\apache13 Change directory to the mod_jk module for Apache 1.3 c:\>cd c:\home\apache\jk\native\apache-1.3 Build the sources using MSDEV c:\>MSDEV mod_jk.dsp /MAKE ALL Copy the dll to your apache modules directory c:\>cp release\mod_jk.so c:\apache13\modules\

An example on how to build mod_jk for Apache 2.0:

Set location for Apache 2.0 sources c:\>set APACHE2_HOME=c:\apache20 Change directory to the mod_jk module for Apache 2.0 c:\>cd c:\home\apache\jk\native\apache-2.0 Build the sources using MSDEV c:\>MSDEV mod_jk.dsp /MAKE ALL Copy the dll to your apache modules directory c:\>cp release\mod_jk.so c:\apache20\modules\

If msdev is not in your path, enter the full path to msdev.exe. Also, ApacheCore.lib is expected to exist in the ${APACHEX_HOME}\src\CoreD and ${APACHEX_HOME}\src\CoreR directories before linking will succeed. You will need to build enough of the Apache source to create these libraries. This will build both release and debug versions of the redirector plug-in (mod_jk). An alternative will be to open mod_jk.dsp in msdev and build it using the build menu.

Since OS400 V4R5, iSeries (AS/400) has used Apache 2.0 as their primary web server, replacing the old IBM webserver. It's now possible to build mod_jk on iSeries thanks to the help of the IBM Rochester Labs which has provided information and patches to adapt mod_jk to OS400.

You should have at least Apache 2.0.48 (product 5722DG1), a C Compiler and IFS. Apache 2.0.48 is provided with the most recent set of PTFs for the iSeries Apache server, which can be found at http://www.ibm.com/servers/eserver/iseries/software/http/

The all latest Apache 2 for OS400 V5R3 is now 2.0.52 (2005/03/23). Be sure to have the latest PTF loaded (SI17402/SI17061) if you want to make use of jk 1.2.8 and higher.

To configure mod_jk on iSeries use the CL source provided with the mod_jk source.

• Get the latest mod_jk source and untar it on a Windows or Unix boxes
• Create a directory in IFS, ie /home/apache
• Send the whole jk source directory to iSeries directory via FTP.
• Then go to the iSeries command line :

Create mod_jk library ===>CRTLIB MOD_JK TEXT(‘Apache mod_jk tomcat connector module’) Create service program source file ===>CRTSRCPF MOD_JK/QSRVSRC TEXT(‘Service program source file’) Create the CL build program source file ===>CRTSRCPF FILE(MOD_JK/QCLSRC) TEXT(‘Build program source file’) Edit the service program source file ===>STRSEU MOD_JK/QSRVSRC MOD_JK

In the edited file, specify that only jk_module should be exported :

Columns . . : 1 71 Edit MOD_JK/QSRVSRC SEU==> MOD_JK *************** Beginning of data ************************************* 0001.00 STRPGMEXP PGMLVL(*CURRENT) 0002.00 EXPORT SYMBOL("jk_module") 0003.00 ENDPGMEXP ****************** End of data ****************************************

You could start to build all the modules of mod_jk :

Copy the CL build program source from IFS ===>CPYFRMSTMF FROMSTMF('/home/apache/jk/native/apache-2.0/bldjk.qclsrc') + TOMBR('/QSYS.LIB/MOD_JK.LIB/QCLSRC.FILE/BLDJK.MBR') MBROPT(*REPLACE) Build the CL build program ===>CRTCLPGM PGM(MOD_JK/BLDJK) SRCFILE(MOD_JK/QCLSRC) TEXT('Apache mod_jk build program') Launch the build ===>CALL MOD_JK/BLDJK If the build if successfull, copy the new mod_jk module ===>CRTDUPOBJ OBJ(MOD_JK) FROMLIB(MOD_JK) OBJTYPE(*SRVPGM) TOLIB(QHTTPSVR) NEWOBJ(MOD_JK)

Next, you should restart your Apache 2.0 server and enjoy this piece of OpenSource on iSeries.

Mac OS X (10.2.x) build notes :

Assuming that you are root :

For Apache 1.3: [user@host] ~ $ ./configure --with-apxs=/usr/sbin/apxs [user@host] ~ $ cd apache-1.3 [user@host] ~ $ make -f Makefile.apxs [user@host] ~ $ cp mod_jk.so /etc/libexec/httpd For Apache 2.0: [user@host] ~ $ ./configure --with-apxs=/usr/local/apache2/bin/apxs (you should point to the directory where you installed Apache 2.0) [user@host] ~ $ cd apache-2.0 [user@host] ~ $ make -f Makefile.apxs install

mod_jk allows to install mod_jk in the Apache source tree to get a statically linked mod_jk. Having mod_jk in the httpd executable brings some performance improvements. The configure option --with-apache prepare mod_jk to install it in the Apache source tree. The option --with-apache works both for Apache-1.3 and Apache-2.0. The examples below show how to get mod_jk in the httpd process.

Installation in Apache-2.0

/home/apache20/httpd-2.0.43 is the directory where the httpd-2.0 sources are located. [user@host] ~ $ ./configure --with-apache=/home/apache20/httpd-2.0.43 [user@host] ~ $ make Install the mod_jk library and other files in /home/apache20/httpd-2.0.43/modules: [user@host] ~ $ make install It is not possible to configure Apache directly because the config.m4 of mod_jk must be added to the configure of httpd-2.0. [user@host] ~ $ cd /home/apache20/httpd-2.0.43 [user@host] ~ $ sh buildconf [user@host] ~ $ configure ... --with-mod_jk [user@host] ~ $ make [user@host] ~ $ make install The enable-jk=share and enable-jk=static are not supported. --with-mod_jk only allow static linking of mod_jk.

Installation in Apache-1.3

/home/apache/apache_1.3.27 is the directory where the apache-1.3 sources are located. [user@host] ~ $ ./configure --with-apache=/home/apache/apache_1.3.27 [user@host] ~ $ make Install the libjk library, mod_jk.c, includes and other files in /home/apache/apache_1.3.27/src/modules/jk: [user@host] ~ $ make install Configure in the Apache sources: [user@host] ~ $ cd /home/apache/apache_1.3.27 [user@host] ~ $ configure ... --enable-module=dir --disable-shared=dir \ --activate-module=src/modules/jk/libjk.a \ --disable-shared=jk [user@host] ~ $ make [user@host] ~ $ make install The --enable-shared=jk is also working and builds a dso file. Just change the configure in the Apache sources: [user@host] ~ $ configure ... --enable-module=dir --enable-shared=dir \ --activate-module=src/modules/jk/libjk.a \ --enable-shared=jk